Model No: Contact for Model Number
The PBX-ALU-SYS Series System is designed to accommodate Talkaphone’s ETP-110, ETP-500, VOIP-200, VOIP-500, and VOIP-600 Series Call Stations. Versatile and robust, this full-featured... Read More
Model No: POE-MID-EXT-1
- Outputs 12VDC up to a maximum of 25W of power to a non-PoE device from a 30W, IEEE 802.3at PoE source
- RJ45 connectors for data input and output
- Two (2)... Read More
Model No: ETP-CI-4G-GSM
- Supports 4G LTE network standards
- RJ11 port allows direct connection of an ETP-110 or
- ETP-500 Series Analog Call Station
- Rugged aluminum... Read More
Model No: ETP-CI-4G-V
• Supports 4G LTE network standards • RJ11 port allows direct connection of an ETP-110 or ETP-500 Series Analog Call Station • Rugged aluminum enclosure • Includes a MIMO antenna... Read More
Model No: AOR-IP-120-CU
The AOR-IP Series is an IP-based system accommodating up to 160 ADA-compliant area of rescue IP call stations. The system offers the capability for multiple IP command units, on-and... Read More
Model No: AOR-IP-CSE-FM
• Fully compliant with IBC, ADAAG, ICC A117.1 Ch. 7, and NFPA 72 • Network supervision available when used in conjunction with IP supervisor (Model AOR-IP-SUP) • Automatically... Read More
Model No: AOR-IP-CSE-SM
- Fully compliant with IBC, ADAAG, ICC A117.1 Ch. 7, and NFPA 72 •
- Network supervision available when used in conjunction with IP supervisor (Model... Read More
Model No: PBX-GS-6204
- Use Voice over IP to communicate over LAN/WAN
- Supports up to 500 SIP endpoints (i.e. call stations and attendant desk phones)
Model No: ETP-WM-AED-1
- Fits virtually any AED
- Robust and stylish
- Access anywhere a life-saving AED may be needed
Model No: AC-WM-6C
The VIA™ Series mass transit wall mount (model AC-WM-6C) is an assistance request and communication point - "If you see something, say something." This stylized wall mount is available... Read More
Model No: AC-WM-3C3
The VIA™ Series access and entry communication wall mount (model AC-WM-3C3) is a connection point between you and the world- simply connect and communicate. This stylized wall mount is... Read More
Model No: AC-PM-4NCS
The VIA™ Series access and courtesy communication pedestal (model AC-PM-4NCS) is a connection point between you and your destination. This stylized access control pedestal is available... Read More
Model No: AC-MT
The VIA™ Series tower (model AC-MT) is an ideal solution for locations with foot traffic, visitors, and staff. The always-lit blue LED light band provides high visibility and gives... Read More
Model No: ETP-MT/R
- Provides high visibility and gives passers-by a sense of security
- An emergency call can be placed with a simple push of a button
- The faceplate is... Read More
Model No: WEBS-MT/R
- Notify large masses of people with an intelligent message
- The vandal-resistant tower serves as a deterrent to crime
- Used as part of WEBS®... Read More
Model No: ETP-MT
- Call emergency personnel with a simple push of a button
- Blue light provides high visibility
- Gives passers-by a sense of security
Model No: ETP-MTE
- Combines economy and ecology into one stylish product
- Durable yet lightweight aluminum
- Security Products 2012 New Product of the Year... Read More
Model No: ETP-WMS
- Security solution for remote and high-risk areas
- Contemporary architectural styling
- ADA compliant
Model No: ETP-WM
- Constructed out of durable stainless steel
- LED blue light provides high visibility
- Gives passers-by a sense of security
Model No: VOIP-600E
- Clean and simple interface
- Backlit call progress signage for the hearing impaired
- IP66 rated for harsh environments
Model No: VOIP-200C3
- Interconnects with the AVM-1 IP video attendant station for a one-stop solution
- Aux output to activate the door opener
- ONVIF compliant wide-angle... Read More
Model No: AVM-1
- Supports up to thirty (30) VOIP-200 Series IP Call Stations
- Integrated system with VOIP-200 and AVM-1 attendant station
- Head-end for monitoring access to... Read More
Model No: VOIP-201C3
- Interconnects with the AVM-1 IP video attendant station for a one-stop solution
- Aux output to activate the door opener
- ONVIF compliant wide-angle... Read More
Model No: VOIP-500E
[vc_row][vc_column][vc_column_text]- Intelligible audio paging, silent monitoring, and advanced self-diagnostic and reporting features
- Configuration and firmware... Read More
Model No: ETP-PM
- Mounts into a concrete foundation
- The faceplate is illuminated at all times by a LED panel light
- Constructed of... Read More
Model No: ETP-SM-1
- Durable housing for mounting a call station outdoors on a wall, pole, or kiosk
- Slim design hugs faceplate for optimal space saving
- 16GA (.0625 in.)... Read More
Model No: ETP-SMH-1
- Hooded surface mount accessory
- Durable stainless steel
- Weather protective hood
Model No: ETP-MT/R-OP4
- Stands 14ft tall with tower arm
- Provides high visibility
- Mount your own CCTV dome camera
Model No: WEBS-MT/R-OP4
- Notify large masses with an intelligent message
- Used as part of the WEBS® system
- Includes mounting arm for CCTV dome camera
Model No: ETP-MTE-ARM
- ETP-MTE accessory
- Overhead camera mount
- added surveillance option
Model No: ETP-MT-Solar60
- Solar system configuration options
- Constructed out of durable stainless steel
- Coating designed to resist extreme weather conditions
Model No: ETP-MT/R OP PCS
- Accommodates a Power Charging System for switched power and/or a wireless interface
- Internal shelf for storage and organization of power and wireless... Read More
Model No: ETP-MT/R-AED
- Secured, recessed chamber to house AED unobtrusively
- Optional thermostatically controlled heater for AED compartment maintains temperature above freezing ... Read More
Model No: ETP-WME
- Economy version of the wall mount
- Same durability with stainless steel construction
- Protective polycarbonate housing
Model No: ETP-WMSE
- Economy version low profile wall mount
- Same durability with stainless steel construction
- Protective polycarbonate housing
Model No: ETP-PMD
- Dual faceplate options
- Allows a card reader, camera, directory or other devices
- Mounts into concrete foundation
Model No: ETP-PM-SS
- Mounts into concrete foundation
- Faceplate is illuminated at all times by a LED panel light
- Constructed of vandal resistant 1/4-inch... Read More
Model No: ETP-PMD-SS
- Dual faceplate options
- Allows a card reader, camera, directory or other devices
- Mounts into concrete foundation
Model No: ETP-SMH
- Hooded surface mount accessory
- Durable stainless steel
- Weather protective hood
Model No: ETP-SMB
- Surface mount accessory with door
- Protects faceplate from harsh environments
- Durable marine grade stainless steel
Model No: ETP-GP-C
- Car height mounted housing
- Ideal for drive-up applications
- Parking access control and entry
Model No: ETP-GP-T
- Access phone to be mounted at truck height
- Mount any Talkaphone surface mount
- Available in custom colors
Model No: ETP-GP-D
- Car and truck height mounted housing
- Mount any Talkaphone surface mount
- Parking access control and entry
Model No: VOIP-600H
- Clean and simple interface
- Backlit call progress signage for the hearing impaired
- IP66 rated for harsh environments
Model No: VOIP-600EI
- Clean and simple interface
- Backlit call progress signage for the hearing impaired
- IP66 rated for harsh environments
VOIP-600 Series IP... Read More
Model No: VOIP-600ECK
- Clean and simple interface
- Backlit call progress signage for the hearing impaired
- IP66 rated for harsh environments
Model No: VOIP-500C
- Intelligible audio paging, silent monitoring and advanced self-diagnostic and reporting features
- Configuration and firmware upgrades through Web GUI ... Read More
Model No: VOIP-200H3
- Interconnects with the AVM-1 IP video attendant station for one-stop solution
- Aux output to activate door opener
- Ideal for front door entry, gates and... Read More
Model No: VOIP-201H3
- Interconnects with the AVM-1 IP video attendant station for one-stop solution
- Aux output to activate door opener
- Ideal for front door entry, gates and... Read More
Model No: VOIP-200C
- Interconnects with the AVM-1 IP video attendant station for one-stop solution
- Aux output to activate door opener
- Ideal for front door entry, gates and... Read More
Model No: VOIP-201H
- Interconnects with the AVM-1 IP video attendant station for one-stop solution
- Aux output to activate door opener
- Ideal for front door entry, gates and... Read More
Model No: VOIP-200H
- Interconnects with the AVM-1 IP video attendant station for one-stop solution
- Aux output to activate door opener
- Ideal for front door entry, gates and... Read More
Model No: ETP-500E
ETP-500 Series outdoor-rated, ADA-compliant hands-free call stations go beyond... Read More
Model No: VOIP-500EI
- Intelligible audio paging, silent monitoring and advanced self-diagnostic and reporting features
- Configuration and firmware upgrades through Web GUI ... Read More
Model No: VOIP-500ECK
- Intelligible audio paging, silent monitoring, and advanced self-diagnostic and reporting features
- Configuration and firmware upgrades through Web GUI ... Read More
Model No: ETP-EL
- Continuously lit to draw attention to the location
- LED blue light flashes when activated
- Used in combination with a Talkaphone emergency... Read More
Model No: ETP-EL12/24
- Continuously lit to draw attention to the location
- LED blue light flashes when activated
- Used in combination with a Talkaphone emergency... Read More
Model No: ETP-500C
- Intelligible audio paging, silent monitoring and advanced self-diagnostic and reporting features
- Configuration and firmware upgrades through Web... Read More
Model No: ETP-MBKT
- Mount in combination with Talkaphone emergency phone and blue light
- Use at university and college campuses, parking facilities, shopping malls, medical centers and... Read More
Model No: EC-8
- Utilize up to 8 call stations on one phone line
- Creates an internal communication system without the need for phone lines
- Line seizure eliminates need for... Read More
Model No: ETP-GSM
- Transforms any Talkaphone ETP-400/ETP-500 Series Analog Call Station into a wireless device
- Supports GSM, UMTS, and HSPA+ 3G network standards
- Rugged... Read More
Model No: ETP-MT/R-SOLAR
Talkaphone’s ETP-MT/R-SOLAR Emergency Phone Tower is an ideal security solution for remote and high-risk areas. Standing over nine feet tall, this vandal-resistant tower serves as a great... Read More
Model No: AOR-8
- Accommodates up to 8 Area of Rescue stations
- AOR stations are powered by the command unit
- Command unit can route an emergency phone call to a 911 center... Read More
Model No: AOR-16
- Accommodates up to 16 Area of Rescue stations
- AOR stations are powered by the command unit
- Command unit can route an emergency phone call to a 911... Read More
Model No: ETP-110
-
Connects via analog phone lines or analog PBX extension lines
-
Phone line powered: no power supply or battery backup... Read More
Model No: AOR-32
- Accommodates up to 32 Area of Rescue stations
- AOR stations are powered by the command unit
- Command unit can route an emergency phone call to a 911... Read More
Model No: AOR-24
- Accommodates up to 24 Area of Rescue stations
- AOR stations are powered by the command unit
- Command unit can route an emergency phone call to a 911... Read More
Model No: ETP-500H
ETP-500 Series outdoor-rated, ADA-compliant hands-free call stations go beyond emergency communications with a clean and simple interface, 316 marine grade stainless steel and are IP66... Read More
Model No: ETP-500EI
ETP-500 Series outdoor-rated, ADA-compliant hands-free call stations go beyond emergency communications with a clean and simple interface, 316 marine grade stainless steel and are IP66... Read More
Model No: ETP-500ECK
ETP-500 Series outdoor-rated, ADA-compliant hands-free call stations go beyond emergency communications with a clean and simple interface, 316 marine grade stainless steel and are IP66... Read More
Model No: ETP-SIGN/LD
Talkaphone’s ETP-SIGN/LD Deluxe Lighted Sign designates a location as an Area of Rescue Assistance and aids in locating an emergency phone. The sign features an architectural slim design... Read More
Model No: ETP-SIGN-PFH
Talkaphone’s ETP-SIGN-PFH Area of Refuge Instruction Sign designates a location as an Area of Rescue Assistance and aids in locating emergency... Read More
Model No: OP-4D-EXT
This add-on crossbar easily fits any existing Talkaphone tower arm. Simply detach your current camera from your existing tower arm, and secure the new OP4-EXT into the originally provided... Read More
Model No: WEBS-CONTACT-S
WEBS Contact S™ is a highly reliable hosted Software as a Service (SaaS) mass notification solution that makes it easy to send intelligible notifications to defined groups of VOIP-500 and... Read More
Model No: VOIP-TAL-SERVER
VOIP-TAL-SERVER is a network appliance that automatically tests and verifies connectivity of VOIP-500 Series Phones and WEBS®-enabled devices. Talkaphone’s VOIP-TAL software... Read More
Model No: PCS-42-6
Power Charging Systems allow emergency phone towers to be powered from a switched power supply. PCS-42-6 Includes:- 6 Amp battery charger
- One deep cycle... Read More
Model No: ETP-MTE-W
The ECO TOWER™ emergency phone tower, model ETP-MTE-W is designed for stand-alone remote area installations, where only a switched power source is available and/or communication lines are... Read More
Model No: ETP-MTE-72
The ECO TOWER® emergency phone tower combines economy and ecology into one stylish product. Durable yet lightweight, this aluminum tower stands six feet tall. An always-lit LED Blue Light... Read More
Model No: MS-600
Talkaphone’s MS-600 is a mounting sleeve for flush mounting ETP-400, ETP-500, VOIP-500 and VOIP-600... Read More
Model No: VOIP-RF-FM3100
Talkaphone’s VOIP-RF-FM3100 Wireless Interface is a MIMO-based tri-band wireless Ethernet solution capable of offering extreme performance with a small form factor. Operating at 4.9 GHz... Read More
Model No: VOIP-RF-FM1100
Talkaphone’s VOIP-RF-FM1100 Wireless Interface is a MIMO-based wireless radio capable of offering extreme performance with a small form factor. The intuitive design makes it easy to... Read More
Model No: VOIP-RF-FM-POE
Talkaphone’s VOIP-RF-FM-POE Power over Ethernet Injector is designed to provide power to VOIP-RF-FM1100 and VOIP-RF-FM3100 when... Read More
Model No: ETP-MTE-WP
The wireless ECO TOWER® emergency phone tower, model ETP-MTE-WP is designed for stand-alone remote area installations, where local power and/or communication lines are not available.... Read More
Model No: ETP-SIGN/R
Talkaphone’s ETP-SIGN-R Self-Adhesive Sign designates a location as an Area of Refuge and aids in locating an emergency phone. The sign features raised lettering and Braille for ADA... Read More
Model No: 86354
Talkaphone’s 86354 Power Supply (24VDC 1A) works with Talkaphone’s VOIP-500 Series Emergency Phones, WEBS-CM-2 Communications Module, WEBS-PA-1 Indoor Area Paging Unit and ETP-EL12/24... Read More
Model No: ETP-MT/R OP3
Talkaphone’s ETP-MT/R OP3 Emergency Phone Tower is an ideal security solution for remote and high-risk areas. Standing over nine feet tall, this vandal-resistant tower serves as a great... Read More
Model No: ETP-MT/R OP2
Talkaphone’s ETP-MT/R OP2 Emergency Phone Tower is an ideal security solution for remote and high-risk areas. Standing over nine feet tall, this vandal-resistant tower serves as a great... Read More
Model No: EB-300
Base station automatically displays a 6-digit identification code for any Talkaphone 100-Series or 400-Series Emergency Phone. Base station functions as a standalone unit but also works in... Read More
Model No: WEBS-PM
- Pedestal mounted where wide-area audio broadcast is desired
- Standing over four feet tall
- Pedestal serves as a great deterrent to... Read More
Model No: K-SM
The K-SM is a surface mounting box for Talkaphone Models K-LR-2R and... Read More
Model No: KB-ML-10
The KB-ML-10 is a durable, reliable solution for any 10-channel application where the Master does not need to talk... Read More
Model No: HS-RF-1
The HS-RF-1 is a wireless headset system that combines the clarity and performance of traditional corded technology with hands-free convenience of wireless mobility. HS-RF-1 is used with... Read More
Model No: 6309
Cable for indoor or outdoor use with Talkaphone intercom... Read More
Model No: 6306
Cable for indoor or outdoor use with Talkaphone intercom... Read More
Model No: IW-IB-6
The IW-IB-6 is a paging control unit to be used with the IW-HFM-4 intercom system. One IW-IB-6 is required for each paging... Read More
Model No: IW-HFS-1H
The IW-HFS-1H is an indoor, hands-free sub-station with handset for privacy, to be used with the IW-HFM-4 hands-free intercom... Read More
Model No: IW-HFS-1
The IW-HFS-1 is an indoor, hands-free sub-station to be used with the IW-HFM-4 hands-free intercom... Read More
Model No: IW-MIC
The IW-MIC is a flexible microphone that features high sensitivity and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference. IW-MIC is used... Read More
Model No: ETP-SMCR
Talkaphone’s ETP-SMCR Card Reader Surface Mount Accessory allows any Emergency, Information or Access phone to be mounted together with a card reader or other device to a wall, on a pole,... Read More
Model No: ETP-103V
The ETP-103V is an indoor hands-free Emergency Phone designed to fit behind an elevator Car Operating Panel and connect to a call button on the C.O.P. Includes the capability to record a... Read More
Model No: WEBS-CM-2
Talkaphone’s WEBS-CM-2 WEBS Communications Module is an outdoor-rated security solution that can be used for a wide variety of applications where wide-area audio broadcast to line level... Read More
Model No: WEBS-CONTACT-PLUS
WEBS Contact Plus™ makes it easy to send mass notifications through a wide range of media to defined groups of recipients and WEBS®-enabled devices. Recipients are able to receive... Read More
Model No: WEBS-CL-10
WEBS Contact® software comes with ten (10) device licenses. SMS, Email, and RSS notifications do not require device licensing. WEBS-CL-10 provides 10 additional device licenses to add... Read More
Model No: 6303
Cable for indoor or outdoor use with Talkaphone intercom... Read More
Model No: K-SM-L
The K-SM-L is a surface mounting box for Talkaphone model... Read More
Model No: VOIP-201C
VOIP-200 Series IP call stations feature a contemporary new design and compact form factor that make them ideal for front door entry, gates and other applications where both space-savings... Read More
Model No: K-LR-2R
This 2-way indoor/outdoor speaker is designed for hands-free operation with any Talkaphone intercom... Read More
Model No: S-8318B
This indoor Ceiling Speaker (8") is designed for paging from any Talkaphone intercom... Read More
Model No: WEBS-SERVER
WEBS-SERVER is a network appliance that brings on-premise mass notification capability to VOIP-500 Series Phones and WEBS®-enabled devices. Talkaphone’s WEBS Contact® software... Read More
Model No: KB-ML-5
The KB-ML-5 is a durable, reliable solution for any 5-channel application where the Master does not need to talk... Read More
Model No: KB-LC-2W
The KB-LC-2W is a durable, reliable solution for any single channel application where the Master does not need to talk... Read More
Model No: KB-ML-5WA
The KB-ML-5WA is a high-powered 5-channel Master with tone-signal and annunciator lights to announce incoming... Read More
Model No: KB-ML-10WA
The KB-ML-10WA is a high-powered 10-channel Master with tone-signal and annunciator lights to announce incoming... Read More
Model No: ETP-SIGN/L
Talkaphone’s ETP-SIGN/L Lighted Sign designates a location as an Area of Rescue Assistance and aids in locating an emergency phone. The sign features high intensity red LEDs providing... Read More
Model No: ETP-SIGN
Talkaphone’s ETP-SIGN Self-Adhesive Sign designates a location as an Area of Rescue and aids in locating an emergency phone. The sign features raised lettering and Braille for ADA... Read More
Model No: WEBS-RETRO-MT/R
The WEBS-RETRO-MT/R is a kit that converts an existing ETP-MT/R Tower to a highly visible WEBS®-capable Mass Notification... Read More
Model No: WEBS-RETRO-MT/R4
The WEBS-RETRO-MT/R4 is a kit that converts an existing ETP-MT/R OP4 or ETP-MT/R OP5 Tower to a highly visible WEBS®-capable Mass Notification... Read More
Model No: WEBS-RETRO-MT
Talkaphone’s WEBS-RETRO-MT is a retrofit kit designed to convert an existing ETP-MT tower into a highly visible, WEBS-enabled audio broadcast tower. Once upgraded, the tower can be used... Read More
Model No: WEBS-ZPS
Model WEBS-ZPS Paging Controller is a modular telephone zone paging and control system for use with WEBS® Emergency Phone... Read More
Model No: WEBS-ZPM-9
Model WEBS-ZPM-9 Zone Paging Module is a zone paging expansion module for use with the analog WEBS-ZPS Zone Paging... Read More
Model No: WEBS-PA-1
Talkaphone’s WEBS-PA-1 Indoor Area WEBS Paging Unit is an attractive, discreet security solution for indoor areas where wide-area audio broadcast is desired. The unit can be used as part... Read More
Model No: WEBS-WM
Talkaphone’s WEBS-WM Wall Mount Emergency Phone Station is an ideal security solution for remote and high-risk areas where wide-area audio broadcast is desired. The unit can be used as... Read More
Model No: WEBS-PA-2IP
Talkaphone’s WEBS-PA-2IP Outdoor Area WEBS Paging Unit is an ideal security solution for outdoor areas where wide-area audio broadcast is desired. The unit can be used as part of the... Read More
Model No: WEBS-PA-2A
Talkaphone’s WEBS-PA-2A Outdoor Area Paging Unit for analog WEBS is an ideal security solution for outdoor areas where wide-area audio broadcast is desired. The unit can be used as part... Read More
Model No: WEBS-MT/R-OP5
Talkaphone’s WEBS-MT/R OP5 Emergency Phone Tower is an ideal security solution for remote and high-risk areas where wide-area audio broadcast is desired. The unit can be used as part of... Read More
Model No: PCS-84-10
Power Charging Systems allow emergency phone towers to be powered from a switched power supply. PCS-84-10 Includes:- 10 Amp battery charger
- Two deep cycle... Read More
Model No: ETP-UPS
The ETP-UPS is a back-up power supply designed for use with the EC-8... Read More
Read More
Model No: EB-200
Base Station automatically displays a 6-digit identification code for any Talkaphone Emergency... Read More
Model No: ETP-DMRK
Punch Down Block with RJ11 ports for easy connection when used with EC-8 Emergency Phone... Read More
Model No: ETP-TAL
Talk-A-Lert® is a hardware/software package that automatically tests ETP-100 Series and ETP-400 Series Emergency Phones and phone lines. It also serves as a base station, displaying... Read More
Model No: ETP-PMKT
Use the pole mounting kit, model ETP-PMKT, to strap a Talkaphone surface mount or wall mount to a... Read More
Model No: ETP-PDMK-4
Designed for mounting Emergency Phone Towers into parking decks with pre-poured... Read More
Model No: ETP-PDMK-2
Designed for mounting Emergency Phone Towers into parking decks with pre-poured... Read More
Model No: ETP-SMW
- Ideal security solution for areas where a wireless interface is desired
- Installed with a power charging system and/or a wireless interface in a single... Read More
Model No: ETP-SML
Talkaphone’s ETP-SML Lighted Surface Mount Accessory is designed to surface mount any Talkaphone flush mount emergency phone indoors or outdoors and to identify the location of an... Read More
Model No: ETP-SME
Talkaphone’s ETP-SME Surface Mount Extension is designed to allow bottom conduit connection to Talkaphone’s ETP-401 Series and ETP-402 Series surface mount emergency phones. The unit is... Read More
Model No: ETP-MT-72
Talkaphone’s ETP-MT-72 Emergency Phone Tower is a shorter version of the ETP-MT Emergency Phone Tower, standing at six feet high. An always-lit LED Blue Light mounted atop the tower... Read More
Model No: ETP-MT/R OP5
Talkaphone’s ETP-MT/R OP5 Emergency Phone Tower is an ideal security solution for remote and high-risk areas. Standing over eleven feet tall (including the camera arm), this... Read More
Model No: ETP-103
The ETP-103 is an indoor hands-free Emergency Phone designed to fit behind an elevator Car Operating Panel and connect to a call button on the... Read More
Model No: ETP-PMKT-TOOL
- Model: ETP-PMKT-TOOL
- Pole mount strapping tool
- Can be used to strap Talkaphone’s wall mount units to a pole using 3/16” to 3/4" wide... Read More