ETP-520 Series Analog Call Station with

ETP-520EI

ETP-520 Series Analog Call Station with "EMERGENCY" Button/Signage and "INFO" Button/Signage

  • Dual-button Call Station with ADA-compliant "EMERGENCY" and "INFO" signage (raised letter and braille)
  • [NEW]  Each button can auto-dial up to five (5) phone numbers.  If the first number does not answer or is busy, unit dials the second number.  If the second number does not answer or is busy, unit dials the third number—and so on.
  • Powered by and operates on a standard analog phone line or extension (no power supply required)
  • Two (2) LED indicators for hearing impaired (labeled "CALLING" and "ANSWERED")
  • Ability to identify the physical location of the call station through a pre-recorded voice message that plays at the beginning of a call
  • [NEW]  Line level output (600 Ohm) connects to an audio amplifier or paging system—providing the capability of receiving an audio page (mass notification) through a standard telephone call
  • [NEW]  Compatible with active induction hearing loop panel (Model AHLP-1)—external power supply required

ETP-520 Series outdoor-rated, ADA-compliant hands-free analog call stations go beyond emergency communications with a clean and simple interface, 316 marine grade stainless steel, and are IP66 water rated for harsh environments.

 

Features and Benefits

  • Dual-button Call Station with ADA-compliant "EMERGENCY" and "INFO" signage (raised letter and braille)
  • [NEW]  Each button can be programmed to auto-dial its own phone number list with up to five (5) phone numbers.  If the first number does not answer or is busy, unit dials the second number.  If the second number does not answer or is busy, unit dials the third number—and so on.
  • Vandal resistant 316 marine grade stainless steel faceplate
  • IP66 water resistant construction
  • Stainless steel metal button designed for long lasting usage and weather exposure
  • Two (2) LED indicators for hearing impaired (labeled "CALLING" and "ANSWERED")
  • Operates on regular phone lines for communication and function
  • Phone line powered—no power supply or battery backup required
  • Monitor mode will auto-answer a call initiated by an attendant—allowing them to monitor the local area
  • Ability to identify the physical location of the call station through a pre-recorded voice message that plays at the beginning of a call
  • Available Auxiliary Input can be triggered by a momentary dry contact closure (e.g., vehicle detector) to auto-dial a list of phone numbers—order Model ETP- AUXIN-KIT-2 to enable feature
  • Two (2) Auxiliary Outputs can each provide a dry contact closure to devices such as a blue light beacon, access control panel, or security camera
  • [NEW]  Line level output (600 Ohm) connects to an audio amplifier or paging system—providing the capability of receiving an audio page (mass notification) through a standard telephone call
  • [NEW]  Compatible with active induction hearing loop panel (Model AHLP-1)—external power supply required

Downloads

ETP-520 Series Analog Call Station with

Related Products

Blue Light Phones
Talk-A-Lert Polling and Call Identification System for Analog Call Stations

ETP-TAL-1

Talk-A-Lert Polling and Call Identification System for Analog Call Stations
4G LTE Cellular Gateway for ETP-500/ETP-520 Series Analog Call Stations

ETP-CGW-4G-GSM

4G LTE Cellular Gateway for ETP-500/ETP-520 Series Analog Call Stations
ETP-520 Series Analog Call Station with

ETP-520ECK

ETP-520 Series Analog Call Station with "EMERGENCY" Button/Signage and "CALL" Button/Signage with Keypad