How to program ETP-400V Emergency Phone on PBX extension

Two minutes with a Talk-A-Phone Tech: How to program an ETP-400V Emergency Phone on a PBX extension

Quick Programming

Call the Emergency Phone and enter the following codes.

After each entry, 1 beep = code accepted, 2 beeps = error, try again.

Guard Code: *4**

Emergency Button 1st phone number:
*13*[PHONE NUMBER TO CALL]*

Emergency Button 2nd phone number:
*23*[PHONE NUMBER TO CALL]*

PBX extension mode: *14*3*, *55*, *18*5*

Record Voice ID message: *58*, unit will beep after 10 seconds

Playback Voice ID message: *59*

Pushing emergency button activates Strobe Light (when installed): *27*0*, *56*

Other Video Tutorials

POTS Line PBX Extension
Single-Button

[EMERGENCY]
ETP-400, ETP-400V, ETP-100EB, ETP-100EBV, ETP-100MB, ETP-100MBV ETP-400, ETP-400V, ETP-100EB, ETP-100EBV, ETP-100MB, ETP-100MBV
Single-Button

[TO CALL]
ETP-400C, ETP-400CV ETP-400C, ETP-400CV
Two-Button ETP-400D, ETP-400DV ETP-400D, ETP-400DV
Keypad ETP-400K, ETP-400KV ETP-400K, ETP-400KV
Share this: